Sweet TnT Magazine Trinidad and Tobago Culture
- This topic has 0 replies, 1 voice, and was last updated 3 years ago by
.
-
Posts
-
-
Oil and Gas Jobs November 2021
Oil and Gas Jobs November 2021
The QA QC Inspector (Offshore) – Electrical and Instrumentation will assist in the field execution of the quality assurance and quality control program
Overview / Responsibilities
Massy Wood is recruiting for an QA QC Inspector (Offshore) with Electrical and Instrumentation specialization and experience in the oil and gas industry.
The QA QC Inspector (Offshore) – Electrical and Instrumentation will assist in the field execution of the quality assurance and quality control program by ensuring quality issues/problems within Construction/Engineering are identified, reported and rectified; provide office support when required and not assigned to an offshore asset; plan, coordinate and report on the execution of QAQC plans within Inspection activities/findings for the Construction/Engineering Department; inspect, supervise and attest key hold ITP’s points along with Subcontractors quality personnel on the field; coordinate with Subcontractors quality the correct implementation of Subcontractors Quality Programs.
- Anticipate and resolve problems encountered in the field to eliminate costly rework or re-testing.
- Validates the approval, distribution and revision of procedures, Process Plans and Work / Operations Procedures for the overall Construction activity. Liaises with the Construction/Engineering Department where necessary.
- Identifies and evaluates Quality-related incidents / problems / non-conformances and initiates, recommends, and provides effective solutions where necessary.
- Responsible for the initiation, collection, disposition and retention of QA/QC records in a timely manner in accordance with documented procedures.
- Manages relationship with Sub-contracted companies to ensure compliance between subcontracted services and Client best practices.
- Perform Audit surveillance as work progresses, avoid last minute discoveries, address repetitive non-compliance and monitor implementation of corrective actions in response to the identification of non-conforming products/services through QA/QC Audits or otherwise, until the unsatisfactory condition has been rectified.
- Perform site inspections at subcontractor workshops which include but not limited to Instrument Calibration, Control Valve testing, Material inspections
- Review all inspection and testing reports for compliance, with reference to applicable industry codes and site standards/procedures.
Skills / Qualifications
- Diploma/Certification in Electrical/Instrumentation or Industrial Engineering from a recognised institution.
- Certification/Training in Quality (must be based on ISO 9001:2008) from a recognised institution. (For example, CQE, CQA, CQT or CQI).
- Offshore Experience
- EX Certification
- Wireman License
- A minimum of three (3) years’ experience in a similar position.
- Experience working with E&I material
- Knowledgeable about E&I material storage and Preservation Requirements
- Ability to interpret E&I Drawings
- A working knowledge of Construction / Electrical / Inspection codes and practices such NETA ATS, NEC 500/505, NFPA 70, API 598, API 527
- Inspector shall have direct knowledge of all aspects of electrical testing such as Insulation Resistance testing, Current and Voltage testing
- As a minimum, he shall have experience with: Installation of equipment such as, Measurement Instrumentation, F&G Devices Telecommunication devices, Electrical power and control Cables, Instrument Tubing, Pumps, Motors, Skids, Valves, Vessels, Compressors, Fired Heaters, Auxiliary Equipment, Packaged Equipment in plant construction etc.
Apply Now
Oil and Gas Jobs November 2021
To maximise shift production output and efficiencies in a manner that will achieve production targets and customer requirements whilst promoting a safe and healthy working environment.
Position Summary
- To maximise shift production output and efficiencies in a manner that will achieve production targets and customer requirements whilst promoting a safe and healthy working environment.
Duties and Responsibilities:
- Monitor Plant efficiencies; to ensure output targets are met.
- Monitor all plant operations after 4:00p.m, on weekends and on public holidays including the following areas, Logistics, Batch, Furnace, Operations, Warehouse, Contracted Labour, Plant Security, Stores and Engineering.
- Responsible for the management of Hot End and Cold End activities.
- Minimise machine downtime and production loss by troubleshooting problems through Root Cause Analysis.
- Ensure that audits are performed on a routine basis.
- Ensure that correction of bottle faults are done in a systematic manner.
- Interpret Statistical Analysis.
- Participate in work planning, staffing and the development and review of operating systems and work procedures.
- Participate in the development and implementation of, and perform all duties in accordance with the procedures as per ISO 9001 standards and Client’s Quality Manual.
- Effectively ensure that subordinates adhere to the Company’s/Department’s safety policies and procedures to minimise the risk of injury.
- Conduct the annual performance appraisal of subordinates and undertake appropriate follow-up actions in an effort to develop the capabilities of employees and maximise the efficiency of the department.
- Plan for and participate in training and developmental activities for subordinates.
- Accurately prepare appropriate reports relevant to operations and related matters.
- Ensure safe working environment to minimize the risk of injury.
- Assist in preparing budgets for monitoring and control.
- Liaise with the authorities in the other Departments.
- To comply with the Company’s/ Department’s procedures and policies belonging to the Quality Management System and the Health, Safety & Environmental Management System.
- To fulfill the legal duties of the Occupational Safety & Health Act 2004 as an employee
Sony Playstation 5 825GB SSD (CFI-1008A01R, White) In Stock
Buy Now
Training and Experience
- B.Eng in Engineering or a suitable equivalent
- A minimum of five (5) years experience in a senior supervisory position
- Understanding of Statistical Process Control
- Proficiency in MS Office applications.
- The ability to communicate effectively at all levels
- Experience in glass manufacturing will be an asset
- An equivalent combination of training and experience
Apply Now
Oil and Gas Jobs November 2021
The Supply Chain Manager ensures that all systems, protocols and processes within the supply chain framework and cycle are effectively and efficiently managed.
The Supply Chain Manager ensures that all systems, protocols and processes within the supply chain framework and cycle are effectively and efficiently managed. The incumbent must ensure finished goods are transported and transferred to customers and external locations within established timeframes and quality standards, efficient and cost-optimal procurement of goods and services, vendor/supplier management including negotiations, introduce and continuously improve inventory control measures, maintain the optimal warehouse layout plan requirements, perform demand, supply and production forecasting and planning, manage the accuracy of inputs and outputs of the computerized inventory system, and manage scheduling and logistics for all raw materials and finished products of the Company, resulting in consistent, efficient service to all user departments.
Main Functions:
- Procurement – Overseas the operations of the purchasing and procurement team insuring that international and regional/local orders are accurately recorded and requisite raw materials are purchased to meet requirements.
- Warehouse and Inventory Management – Ensures all Warehouses and Inventory areas are well organised through developing and implementing an inventory rotation and tracking system to streamline consistency of supplies, that safeguard the proper filing and retrieval of stock information, purchase orders and delivery notes
- Inbound & Outbound Logistics – Manage the efficient importation/dispatch and shipping of consumable, goods, raw materials, consumables and other company assets
- Data Analytics & Reports – Monitors and analyses demand, inventory, trends and other statistical data, to generate business reports on inventory levels, supply chain progress, procedural efficiency and personnel issues, for submission to the CFO, as and when required.
- People Management – Provide effective coaching, guidance and direction to employees of the Demand and Supply Chain Department as needed, identifying knowledge gaps and developing or recommending Training and Development programmes to ensure a high level of technical competence, ability and skill of the assigned staff, to ensure achievement of performance outcomes and objectives.
Requirements:
• Undergraduate degree
• Exceptional knowledge in Supply Chain management, leading Distribution and Logistics operations.
• Relevant professional qualification preferred (i.e. MCIPS, APICS or other professional certifications).
• Must be knowledgeable of key supply chain/logistics processes & current best practices.
• Minimum of five (5) years’ strategic management experience in supply chain, logistics and warehousing
Apply Now
Oil and Gas Jobs November 2021
The QA QC Lead Participates in the delivery of a quality service that achieves the requirements of the client & complies with the relevant international/national codes & standards
Overview / Responsibilities
Massy Wood Ltd. is currently seeking expressions of interest for the role of Quality Assurance, Quality Control Lead for a potential project to be based in Trinidad. The role will require previous site experience and having a background in API 650 tankage.
This request is dependent on the award of the project by the Client.
- Carry out the project specific inspection and release as detailed in the Project Quality Plan
- Conduct Review, Witness and Monitor activities as per the approved Quality Control Plans / Inspection and Test Plan
- Attend pre-inspection planning meetings / progress meetings
- Be familiar with the requisition requirements and package/equipment specifications and drawings
- Be familiar with the Suppliers / Sub-contractors Quality Control Plans/Inspection Test Plans and procedures
- Prepare and submit Supplier / Sub-contractor visit reports
- Raise Non-conformances reports and expedite their close out
- Be fully aware of concessions raised, approved and / or reject by the requisitioning engineer
- Monitor package / equipment compliance to statutory regulations (i.e. CE marking)
- Release package / equipment as per project inspection and release process (IRC)
- Review Supplier / Sub-contractor Fabrication/Certification/Data Dossiers on an ongoing basis and prior to release and endorse as appropriate
- To report promptly to the Lead Quality Engineer / Inspection Coordinator all matters related to inspection, test and release
- Provide feedback on Supplier / Sub-contractor performance upon request
- Ensure that all necessary quality records are identified and retained in accordance with company, client and regulatory requirements
- To participate (as necessary) in management visits / audits as requested
- Liaise with requisitioning engineer and buyer as appropriate
Skills / Qualifications
- Diploma/Certification in Construction, Mechanical or Industrial Engineering from a recognised institution
- Certification/Training in Quality (must be based on ISO 9001 🙂 from a recognised (For example CQE, CQA, CQT or CQI)
- 5-10 years must be in managing quality systems in Oil & Gas or Energy
- CSWIP 3.1
- Radiographic Interpretation PCN Level.
- Must have prior API 650 Tankage experience and certifications
- Technically qualified / time served trades person with trade registrations / vocational qualifications
- Has QC Inspection experience
- An engineering and/or inspection background
- Broad knowledge of construction, fabrication and inspection techniques
- Has knowledge of management systems including ISO 9001:2008
- Working knowledge of relevant legislation, codes and standards
- Computer literate (MS Office components)
Apply Now
Oil and Gas Jobs November 2021
The Project Delivery Manager is responsible for the delivery of an integrated Engineering, Procurement and Project / Construction Management Service to the various Contract Clients.
Overview / Responsibilities
Massy Wood is currently recruiting for a Project Delivery Manager with extensive experience in Engineering, Procurement and Construction in the oil, gas and energy sector.
The Project Delivery Manager is responsible for the delivery of an integrated Engineering, Procurement and Project / Construction Management Service to the various Contract Clients. In addition to the Technical aspects this includes maintaining good business relationships built on a foundation of reliable performance and earned respect. Contracts assigned under this responsibility will be determined by the VP Engineering & Projects.
- Set direction and priorities and establish boundaries for Project Team responsible for the delivery of a complete product to the Client, including Engineering, Procurement, Construction and Third Parties.
- Responsible for meeting contract objectives and goals.
- Responsible for delivering projects safely, maintaining quality, on time and within budget.
- Ensure awareness, understanding and compliance with the Business Policies and Procedures.
- Ensure awareness, understanding and delivery of Contractual obligations set out in the individual service Contracts.
- Responsible for achieving Key Performance Indicator (KPI) targets.
- Act decisively and demonstrate drive and determination in the performance management of all aspects associated with the delivery of a complete EPC/M service to the Client, as applicable.
- Ensure that skilled resources are engaged in the development of realistic risk based schedules and the control of costs and that progress is measured and accurate reports generated for the various work programmes.
- Take personal responsibility for promoting and driving continuous improvement activities within all aspects of the business and within reasonable spheres of influence.
- Responsible for ensuring all project activities are compliant to the HSSE standards of the Company and its Client.
- Demonstrate HSSE leadership and increase HSSE awareness of the project team.
- Ensure that Massy Wood Group QMS systems and procedures are implemented by the Projects team.
- Manage the financial performance as well as overall general management of the Contract
- Responsible for ensuring the quality of all project deliverables.
- As the Client point of contact actively seek to develop and maintain business relationships based on open and honest communication, accurate reporting and underpinned by reliable proactive performance, expectation management and earned respect. Speak out and do the right thing for Massy Wood Group and its Clients.
- Responsible for managing interfaces to ensure timely delivery of project.
- Motivate and develop a high performing team with a ‘be safe’ and ‘mistake free’ culture.
- Recognise organisational skills limitations and proactively seek support in these areas.
- Responsible for identifying the training needs of team members and discussing with functional managers.
- Responsible for providing on-the-job training, as well as coaching and mentoring to the project team as required.
- May be required to participate in performance review of team members as applicable.
- Manage reputation and risks to ensure a continuous and safe profitable business delivery.
- Perform all other related job functions as required.
Skills / Qualifications
- Bachelor’s Degree in Engineering from a recognised university
- Certification in Project Management would be an asset
- Minimum of fifteen (15) years’ relevant experience in the Oil & Gas industry experience.
- Competent in a relevant technical discipline.
- Knowledge and application of Project Management practices and procedures
Apply Now
Oil and Gas Jobs November 2021
Provide engineering support to Terminal Operations in compliance with engineering, safety and regulatory standards, consistent with the Business Plan for the Terminal.
Key Accountabilites:
- Provides general engineering services for day to day operations, and development of projects at Terminal Operations
- Develops the equipment care inspection and maintenance plan in consultation with Maintenance and Terminal Operations Manager
- Plans and schedules inspection activities to ensure improved integrity and reliability of the Assets
- Provides engineering assessment to Management of Change requests as and when required
- Develops and executes engineering contracts and procurement structures and processes to best support the operations business needs
- Provides input into outsourcing strategy for provision of engineering and maintenance services in an efficient, cost-effective manner
- Maintains updated key engineering data including the Process and Instrumentation Diagrams, Drawings, Technical Specifications, and Area Classification Maps of Terminal Operations
- Provides technical advice and guidance on Asset optimisation, troubleshooting and engineering design.
- ·Ensures compliance with Asset Management Systems and Procedures.
- Implements HSSEQ standards and ensures adherence to same
- Communicates information effectively upwards and downwards
- Develops strategic goals, objectives and key performance indicators for Section and utilizes Performance Management System to measure, manage, and motivate performance.
- Develops and implements staffing strategy and people development plans.
- Develops departmental budgets and monitors and controls utilization
- Undertakes any other assignments required from time to time to fulfill the job purpose.
Qualifications and Experience:
A Bachelor of Science Degree Engineering (relevant to discipline).
AND
A minimum of five (5) years’ experience in oil and gas operations
We appreciate the interest shown by all candidates. However, we wish to advise that only suitable candidates will be contacted.
Apply Now
Oil and Gas Jobs November 2021
To provide Technical services in support of the terminal operations and maintain an independent perspective regarding the governance of product quality and engineering services.
Key Accountabilities
- Directs the provision of cost efficient and timely technical (laboratory and engineering) services to Terminal Operations
- Develops and drives the automation strategy of terminal operations
- Ensures provision of technical engineering input to projects as required
- Oversees the timely, accurate and reliable provision of product testing services to customers
- Approves and monitors the implementation of improvements to laboratory facilities, equipment, methods and procedures
- Manages support of product quality, asset integrity and reliability and environmental monitoring
- Ensures the governance of Process Safety Management compliance (in particular: Management of Change, Process Hazard analysis, Process Safety Information)
- Ensures compliance with Asset Risk Management Policies, Procedures, and PSM
- Enforces compliance with HSEQ practices, rules and standards through pro-active HSEQ performance review and intervention
- Communicates information effectively upwards and downwards
- Develops strategic goals, objectives and key performance indicators for Technical and utilizes Performance Management System to measure, manage, and motivate performance.
- Develops and implements staffing strategy and people development plans in consultation with HR
- Develop trusting relationship with workers and address grievances
- Directs the development of departmental budgets and monitors and controls utilization.
- Undertakes any other assignments required from time to time, to fulfill the job purpose
Hyatt Regency Trinidad
Book Now
Qualifications and Experience:
BSc. in Chemical Engineering or related Engineering discipline.
AND
A minimum of ten (10) years experience in the energy sector of which at least five (5) must be at a supervising level
Management experience in process technology activities in areas laboratory operations would be an asset
We appreciate the interest shown by all candidates. However, we wish to advise that only suitable candidates will be contacted.
Apply Now
Oil and Gas Jobs November 2021
To direct and control all terminal activities in accordance with environmental regulations, product lifting schedule, and daily objectives, in order to maintain safe, timely and cost effective operations.
Key Accountabilities
- Plans and implements Terminal Turnaround Schedule and Bunker Schedule and modifies as necessary
- Directs berthing of vessels and loading/unloading of cargoes
- Conducts ship/shore safety and cargo inspections in accordance with international/company standards
- Ensures adequate manpower for terminal activities in accordance with company standards
- Prepares daily shift logs and reports on terminal operations.
- Conducts survey of terminal facilities/equipment and initiates appropriate action.
- Reports on all incidents/accidents and near misses including cargo contamination, damage to company and related third party assets.
- Ensures samples are taken from tanks, vessel compartments, pipelines, pumps and oily water separator outlets and delivers to Laboratory for testing in a timely manner
- Oversees that tank dips are taken for loading maximum cargoes to vessels and checks tank dips to verify accuracy of automatic gauge
- Conducts proper shift handover, including completed documentation
- Conduct Job Hazard Analysis as necessary in accordance with Permit to Work Procedures.
- Maintains Emergency Response (Marine included) capability and responds as necessary
- Monitors and controls Terminal operating procedures in accordance with the quality management standards
- Coordinates with Vessel Coordinator in scheduling Marine Crafts in line with plans for efficient tanker turnaround
- Ensures compliance with Asset Management Systems and Procedures.
- Implements HSSEQ standards and ensures adherence to same
- Develops key performance indicators for team and utilizes Performance Management System to measure, manage, and motivate performance.
- Develops and implements people development plans.
- Monitors and controls budget utilization.
- Undertakes any other assignments required from time to time, to fulfill the job purpose
Nike Air Max Genome Men’s Shoes $170
Buy Now
Qualifications and Experience:
- Preferred Degree in Maritime Studies/Natural Sciences/Engineering OR Certificate of Competency as a Marine Watchkeeping Officer – on vessels over 3,000 DWT – (STCW’95) AND a Minimum of five (5) years relevant experience in Terminal Operations (Tanker Berthing and Unberthing is desirable for Offshore OTS)ORMinimum of Ten (10) years relevant experience in Terminal Operations environment (Tanker Berthing and Unberthing is desirable for Offshore OTS)
- Ability to work shift
We appreciate the interest shown by all candidates. However, we wish to advise that only suitable candidates will be contacted.
Apply Now
Oil and Gas Jobs November 2021
Manages and leads complex and challenging risk-based internal audits, producing reports and recommendations for Leadership and Audit Committee.
KEY RESPONSIBILITIES
- Participates in the development of the Company’s annual internal and strategic plans, which includes short and long-range projects, programmes, and initiatives.
- Develops accurate and complete audit programs for complex audits and projects based on a thorough knowledge of the Company’s operations and key processes.
- Interviews Management and process owners to obtain a thorough understanding of underlying governance, risks and controls
- Provides oversight of audit execution, ensuring that working papers and audit findings and recommendations align with engagement objectives.
- Reports, presents findings, and resolves complex issues with Management and stakeholders.
- Utilizes data analytics and data visualization tools to perform full population testing. Identifies new ways to audit through data analytics, continuous auditing or other technologies.
- Provides counsel on internal controls to the Internal Auditors as well as to the Business Units, promoting awareness and accountability
- Provides coaching and feedback to Internal Auditors on both soft and technical audit skills.
- Manages and monitors recommendations and corrective actions from internal and external sources to ensure risk is being addressed.
- Undertakes any other assignments required from time to time, to fulfil the job purpose.
EXPERIENCE & QUALIFICATIONS
- ACCA/ BSc. Accounting, Management, Business, Finance or related field
AND
- A minimum of eight (8) years audit working experience, three (3) of which must be at a managerial/supervisor level.
- A minimum of one professional certification. Applicable certifications include Certified Internal Auditor (CIA); Certified Public Accountant (CPA); Certified Fraud Examiner (CFE), Certification in Risk Management Assurance (CRMA), Certified Information Systems Auditor (CISA).
PREFERRED (would be an asset)
- Proficiency with auditing software
- Big 4 consulting or assurance experience
CLOSING DATE FOR APPLICATIONS: FRIDAY 19TH NOVEMBER 2021
We appreciate the interest shown by all candidates. However, we wish to advise that only suitable candidates will be contacted.
Apply Now
https://sweettntmagazine.com/insurance/
Oil and Gas Jobs November 2021
Performs complex and challenging risk-based internal audits, producing reports and recommendations for Leadership and Audit Committee
KEY RESPONSIBILITIES
- Contributes to the development of the Annual Internal Audit Plan
- Independently performs preliminary planning. Designs and performs tests to determine the effectiveness of the controls in mitigating risks and in achieving management’s business objectives and goals.
- Interviews appropriate staff and managers, reviews policies and procedures, and other applicable documents to understand processes, work-flows, and business objectives. Identifies risks, regulations, laws, and policies and procedures applicable to processes under review. Where applicable, identify leading practices.
- Documents processes, controls, and risks.
- Performs data analytics to identify unusual patterns or trends and investigates to resolution.
- Documents work performed within audit work-papers and draft reports in a clear, methodical manner to sufficiently support conclusions and audit recommendations.
- Prepares and presents reports to process owners and Management, when required.
- Completes timely audit follow-ups and documentation of outstanding findings and retests controls and processes to ensure action plans are complete and sustainable to prevent reoccurrence.
- Develops and provides training to Company and within the Internal Audit department as requested
- Undertake any other assignments required from time to time, to fulfil the job purpose.
EXPERIENCE & QUALIFICATIONS- ACCA/ BSc. Accounting, Management, Business, Finance or related field.
AND
- A minimum of four (4) years audit working experience.
- A minimum of one professional certification would be considered an asset but is not required.
- Applicable certifications include Certified Internal Auditor (CIA); Certified Public Accountant (CPA); Certified Fraud Examiner (CFE), Certification in Risk Management Assurance (CRMA), Certified Information Systems Auditor (CISA).
PREFERRED (would be an asset)
- Proficiency with auditing software
- Big 4consulting or assurance experience
CLOSING DATE FOR APPLICATIONS: FRIDAY 19TH NOVEMBER 2021
We appreciate the interest shown by all candidates. However, we wish to advise that only suitable candidates will be contacted.
Apply Now
Oil and Gas Jobs November 2021
Provides comprehensive and confidential administrative support to the Chief Audit Executive, exercising customer excellence, results orientation and delegated latitude in decision-making towards the effective utilization of leader time and the efficient management of the office.
KEY RESPONSIBILITIES
- Provides comprehensive administrative support in the form of quality documents, communiques, appropriate treatment of issues and alerts leader on high priority/deadline items.
- Provides efficient receipt, handling, dispatch, response, treatment and filing of all incoming and outgoing correspondence.
- Ensures the professional handling of telephone and direct (in person) communications.
- Maintains proactive and efficient coordination of leader time through timely and appropriate scheduling and calendar management.
- Maintains comprehensive and timely retrieval of office records and critical documents.
- Establishes and maintains systems and methods for aiding the execution of secretarial and office administration.
- Coordinates all office activities, physical changes, acquisition of office supplies and equipment and direction to office personnel.
- Conducts specialized research as requested and presentations for executive use.
- Maintain contacts, networks and liaisons across the organization and externally with agencies, organizations and associations to support operational activities as appropriate.
- Initiates requests for management reports, as directed by the CAE, and summarizes same as needed for Board reporting.
- Undertakes any other assignments required from time to time, to fulfil the job purpose.
EXPERIENCE & QUALIFICATIONS
- Associate Degree in Business Administration.
- Three (3) to (5) years in a similar position.
- Proficient in Microsoft Office Suite-Excel, Power Point, Word, Outlook.
CLOSING DATE FOR APPLICATIONS: FRIDAY 19TH NOVEMBER 2021
We appreciate the interest shown by all candidates. However, we wish to advise that only suitable candidates will be contacted.
Apply Now
Oil and Gas Jobs November 2021
Provides commercial, analytical and assurance support to the Manager within the Commercial function and to identify and manage portfolio opportunities and risks related to the purchase and sales of crude and gas.
KEY RESPONSIBILITIES
Commercial Optimization
- Leverages industry colleagues, external relationships and market intelligence to expand customer base and maximize value.
- Conducts comprehensive analysis of commercial proposals related to the opportunity for purchase and sale of crude and gas.
- Identifies commercial opportunities in consultation with Business Development geared towards optimization of value for Heritage.
- Identifies key market, competitor or industry developments, trends and emerging issues and provides recommendations based on market intelligence.
- Evaluates current commercial arrangements with a view of preventing value leakage.
- Recommends and develops commercial structures to minimize risks and increase value, e.g. transfer pricing, hedging, crude oil portfolio.
- Maintains good customer and supplier relations through networking and communication.
- Examines and interprets key performance business indicators and identifies critical issues/variances.
Commercial Contract Development & Management
- Reviews new commercial contracts and arrangements in consultation with Business Development related to the purchase or sale of crude and gas to mitigate risks and maximize value.
- Participates in the negotiation and execution of new commercial contracts or agreements, and re-negotiation of pricing or other terms related to the purchase or sale of crude and gas.
- Monitors compliance with terms and conditions of crude purchase and sales contracts, and LNG sales contracts.
- Conducts due diligence and liaises with buyers/sellers as required; provides support and guidance to Audit and Legal in resolving any issues.
- Advises on incorporating trade economics and complex physical delivery clauses
- Administers all contract work from initiation through to completion.
- Maintains and updates contract templates and system for storing and retrieval of documents.
Commercial Operations
- Monitors inventory against upcoming sales or planned cargoes and liaises with relevant internal and external parties to make adjustments to plan as necessary.
- Reviews and advises on past and current performance of purchase and sales contracts.
- Operationalizes the sales contracts, including facilitating the clearance of vessels; transmittal of documentary instructions; forwarding of cargo documents; receipt, checking and dissemination of letters of credit; monitoring of vessels’ ETA; discussing requests for contractual changes, demurrage and cargo claim handling.
- Communicates with suppliers/customers and responds to their concerns in a timely manner.
- Liaises with the relevant departments for the exchange of information pertaining to purchase and sales.
- Assures or verifies correctness of invoices and monitors payments.
- Coordinates and prepares all departmental reports and documents for Management, Board and Governmental Agencies.
- Co-ordinates all short, medium, and long-term price forecasting as input to planning and budgeting activities.
Other
- Undertakes any other assignments required from time to time, to fulfil the job purpose.
EXPERIENCE & QUALIFICATIONS
- Bachelor’s Degree in Natural Sciences, Engineering, Finance, Economics, Management
- Eight (8) years relevant working experience in the oil and gas industry.
CLOSING DATE FOR APPLICATIONS: FRIDAY 19TH NOVEMBER 2021
We appreciate the interest shown by all candidates. However, we wish to advise that only suitable candidates will be contacted.
Apply Now
Oil and Gas Jobs November 2021
Directs the provision of detailed engineering support services (civil/structural) relative to the design, engineering, procurement and construction for projects, facilities maintenance, and infrastructure upgrades
KEY ACCOUNTABILITIES
- Develops and manages the delivery of optimized engineering contracts and procurement strategies to best support the operations business needs.
- Performs the role of custodian of updated key engineering data including Standard Operating Procedures, Standard Maintenance Procedures, Bill of Materials, Drawings, Technical Specifications, and Area Classification Drawings.
- Provides technical advice and guidance on Asset optimisation, troubleshooting and engineering design.
- Provides resourcing to projects on a needs basis.
- Oversees team in providing hardware and software troubleshooting of Instruments/Control Systems.
- Identifies assets and equipment requirements and determines optimum sources of power supply in order to provide timely and cost-effective delivery.
- Installs, tests and commissions equipment and systems and provides the required technical support.
- Conducts research and prepares studies and technical reports on latest engineering technology developments, codes, standards and best practices.
- Provides technical advice and guides subordinates and clients in the evaluation and selection of equipment and materials.
- Ensures compliance with Asset Management Systems and Procedures.
- Implements HSE standards and ensures adherence to same.
- Develops strategic goals, objectives and key performance indicators for Operations and utilizes Performance Management System to measure, manage, and motivate performance.
- Develops and implements staffing strategy and effectively leads a team of professionals by developing talent and cultivating a high-performance culture.
- Directs the development of departmental budgets and monitors and controls utilization.
- Undertakes any other assignments required from time to time, to fulfill the job purpose
QUALIFICATIONS & EXPERIENCE- BSc. in Engineering (related discipline) AND
- Minimum of eight (8) years’ experience in an oil and gas environment, five (5) of which must be at a supervisory level.
PREFERRED (would be an asset):
- EPC and PMC contract negotiation and administration Certification.
- Project Management Certification
CLOSING DATE FOR APPLICATIONS: FRIDAY 19TH NOVEMBER 2021
We appreciate the interest shown by all candidates. However, we wish to advise that only suitable candidates will be contacted.
Apply Now
Oil and Gas Jobs November 2021
Directs the provision of detailed engineering support services (mechanical) relative to the design, engineering, procurement and construction for projects, facilities maintenance, and infrastructure upgrades.
KEY ACCOUNTABILITIES
- Develops and manages the delivery of optimized engineering contracts and procurement strategies to best support the operations business needs.
- Performs the role of custodian of updated key engineering data including Standard Operating Procedures, Standard Maintenance Procedures, Bill of Materials, Drawings, Technical Specifications, and Area Classification Drawings.
- Provides technical advice and guidance on Asset optimisation, troubleshooting and engineering design.
- Provides resourcing to projects on a needs basis.
- Oversees team in providing hardware and software troubleshooting of Instruments/Control Systems.
- Identifies assets and equipment requirements and determines optimum sources of power supply in order to provide timely and cost-effective delivery.
- Installs, tests and commissions equipment and systems and provides the required technical support.
- Conducts research and prepares studies and technical reports on latest engineering technology developments, codes, standards and best practices.
- Provides technical advice and guides subordinates and clients in the evaluation and selection of equipment and materials.
- Ensures compliance with Asset Management Systems and Procedures.
- Implements HSE standards and ensures adherence to same.
- Develops strategic goals, objectives and key performance indicators for Operations and utilizes Performance Management System to measure, manage, and motivate performance.
- Develops and implements staffing strategy and effectively leads a team of professionals by developing talent and cultivating a high-performance culture.
- Directs the development of departmental budgets and monitors and controls utilization.
- Undertakes any other assignments required from time to time, to fulfill the job purpose
QUALIFICATION AND EXPERIENCE- BSc. in Engineering (related discipline). AND
- Minimum of eight (8) years’ experience in an oil and gas environment, five (5) of which must be at a supervisory level.
PREFERRED (would be an asset):- EPC and PMC contract negotiation and administration Certification.
- Project Management Certification.
CLOSING DATE FOR APPLICATIONS: FRIDAY 19TH NOVEMBER 2021
We appreciate the interest shown by all candidates. However, we wish to advise that only suitable candidates will be contacted.
Apply Now
Oil and Gas Jobs November 2021
Analyzes and recommends all surface and subsurface well optimization activities; investigate, develop, and implement new strategies. Provides technical support to ensure economic workovers with optimized production gains and increased well uptime.
KEY ACCOUNTABILITIES
- Mentors Well Analysts on well programming, pump selection/pump design, troubleshooting low/off wells and production optimization.
- Reviews and approves all well servicing programs and well optimization recommendations issued by the Well Analysts.
- Improves workover success by instituting design changes to downhole and surface configuration, new techniques and equipment selection. Recommends material requirements for sucker rod pump components to improve uptime between workovers.
- Implements operational priority plans for Well Servicing and Well Optimization to achieve Production targets.
- Recommends selection or required change in artificial lift or production method.
- Coordinates well reactivation process.
- Ensures personnel are equipped with resources to perform optimization activities.
- Ensures HSSE compliance.
- Undertakes any other assignments required from time to time, to fulfill the job purpose.
QUALIFICATION AND EXPERIENCE- BSc. in Petroleum/Mechanical/Chemical Engineering or related discipline. AND
- Ten (10) years’ experience in Petroleum Production Operations, five (5) of which must be at a Well Analyst (High Level).
OR
- Technician Diploma in Petroleum/Mechanical Engineering. AND
- Fifteen (15) years’ experience in Petroleum Production Operation, workover activities and Artificial Lift Operations, five (5) of which must be at a Well Analyst (High level).
CLOSING DATE FOR APPLICATIONS: FRIDAY 19TH NOVEMBER 2021
We appreciate the interest shown by all candidates. However, we wish to advise that only suitable candidates will be contacted.
Apply Now
More Jobs
One lucky reader won a Moto G10 smartphone for the month of August by liking Sweet TnT Magazine Facebook Page. September we gave away a Moto G20, in October we gave away a Moto G30 and in November we will be giving away a Moto G50. To qualify like us on Facebook and Subscribe to our Sweet TnT Magazine YouTube channel
Finding a job shouldn’t be a full-time job. Tell us what you’re looking for and we’ll get to work for you.
Over 9 Million Jobs
With millions of jobs available, ZipRecruiter is the only site you’ll need to find your next job.
Apply With One Tap
Say goodbye to long applications. Upload your resume and apply to jobs faster in a click or a tap.
Caribbean Airlines Vacancy November 2021
Executive Assistant at Heritage Petroleum
CSEC Mathematics Teacher Vacancy
Work from Home Office Opportunity
Scarf Print Button Design Long Sleeve Shirt
US$10.36Buy Now
Government Vacancies November 2021 Week 2
RBC Royal Bank of Canada Vacancy
The BRIX Autograph Collection Vacancy
Ministry of Labour Vacancies Nov 2021
Five Islands Vacancies November 2021
DRIVER COURIER Employment Opportunity
Ministry of Education Vacancies November 2021
Offshore Vacancies November 2021
First Citizens Bank Vacancy October 2021
Trinidad & Tobago International Financial Centre Vacancy
EMBD Checker Vacancy October 2021
Massy Stores Vacancies October 2021
Ministry of Finance Vacancies 2021
Hospital Vacancies October 2021
Administrative Assistant Vacancy UDeCOTT
Parliament of Trinidad and Tobago Vacancies
Accounting Vacancies October 2021
Caribbean Cinemas Vacancies October 2021
Water Taxi Job Opportunity October 2021
Kaizan Sushi Vacancies October 2021
Ministry of Health Vacancy October 2021
US Embassy Vacancy October 2021
Sales Representative Vacancy Schlumberger Limited
Republic Bank Vacancy October 2021
North West Regional Health Authority Vacancies
Digicel Vacancies October 2021
NIPDEC Warehouse Clerk Vacancy
AMPLIA Career Opportunity October 2021
Government Vacancies October 2021
National Flour Mills Vacancy October 2021
Land Settlement Agency Vacancies Oct 2021
UWI Career Opportunities Oct 2021
TSTT Career Opportunity October 2021
Peak Season Vacancies October to December 2021
Amplia Career Opportunity October 2021
Caribbean Airlines Vacancy October 2021
Oil and Gas Career Opportunities October 2021
Career Opportunities at KPMG Trinidad
Merchandising Supervisor Employment Opportunity
Ministry of Education Vacancies October 2021
Online Data Entry Jobs (Work At Home Jobs)
Micon Marketing Limited Supervisor Vacancy
Restaurant Jobs September 2021
Port Authority Vacancies September 2021
Oil and Gas Vacancies September 2021
Government Vacancies September 2021 Week 5
Ministry of Finance Vacancies September 2021
Ministry of Tourism Vacancy September 2021
Min of Education Vacancies September 2021
MERCHANDISER Massy Distribution (Trinidad) Ltd.
Banking Vacancies in Trinidad and Tobago
A S Bryden & Sons September 2021
Government Vacancies September 2021 Week 4
Secondary School Teacher Vacancies
NIDCO Vacancies September 2021
Ministry of Education Vacancies Sept 2021
UDeCOTT Vacancy September 2021
Ministry of Trade and Industry Vacancies Sept 2021
Government Vacancies September 2021 Week 3
SporTT Vacancies September 2021
Merchandising Supervisor Vacancy Sept 2021
American Airlines Vacancy September 2021
Data Entry Clerk Vacancy Bryden
Movie Towne Vacancies September 2021
NIPDEC Vacancies September 2021
Government Vacancies September 2021 Week 2
Land Settlement Agency Vacancies September 2021
Ministry of Works and Transport Vacancies 2021
Bryden Vacancies September 2021
Labourer Massy Energy Vacancy September 2021
Bermudez Vacancy September 2021
VEMCO Vacancies September 2021
National Training Agency Vacancy
Government Vacancies Aug 2021 Week 3
Government Vacancies July 2021
Government Vacancies Aug 2021 Week 2
Remote jobs in Trinidad and Tobago August 2021
COSTATT Employment Opportunities August 2021
Employment Opportunities in Accounting May 2021
National Flour Mills Vacancy July 2021
Government Vacancies Aug 2021 Week 1
-
- You must be logged in to reply to this topic.